Care For Your New Electric Furnace And Troubleshoot Problems

2 November 2017
 Categories: Business, Blog


If you recently had a new electric furnace installed in your basement, proper maintenance will protect your investment and ensure that it continues working throughout the winter. Use the tips below to care for your furnace and troubleshoot an issue if your efforts still result in your furnace not operating correctly.

Obtain A Manual And Learn About Various Features

After a heating and air technician intalls your new furnace, ask them if you can receive a copy of your heating device's manual. Read through the manual so that you can familiarize yourself with some of the features that your furnace possesses. As you read through the information, look at your furnace so that you can identify specific parts and learn what buttons need to be pressed in order to turn the furnace on or off. 

Change The Filter As Needed

Your furnace's filter should be changed regularly to prevent blockages which could affect the amount of heat that is dispersed in your home. A severely dirty filter could also cause your furnace to malfunction altogether, which may result in the need for expensive repairs. A filter is an inexpensive item that can be purchased from a grocery store or home improvement center. Open the door that house's your furnace's filter.

Obtain the measurements of the filter by looking at the sides of the filter. The numbers should be printed clearly on a portion of the filter's frame. Purchase a couple filters and place them in a utility closet so that you will always have one on hand in case the current one needs to be changed. Get into the habit of visually inspecting the filter each month so that you can determine if a new filter is needed.

Inspect The Knob, Thermostat, And Air Ducts If An Issue Arises

Avoid altering the thermostat and always leave the temperature setting on a temperature that is comfortable. if you fail to do this and adjust the thermostat a lot, the vital part may break and you will need the assistance of a heating and air repair person. If you do your best to take care of the furnace and you still encounter a situation in which warm air is not blowing through the vents in your home, inspect the knob that controls your unit to ensure that it is turned on properly.

Check the thermostat to make sure that the temperature is at the one that you previously selected. If these two items are adjusted properly, visually inspect the air ducts in your home to see if there is anything blocking one of them. If you are not able to troubleshoot the issue on your own, contact a heating and air technician for further assistance. For more information, contact companies like Shakley Mechanical Inc.